Shop Categories

Product Details

 FSR402 Force Sensitive Resistor 0.5 inch FSR
FSR402 Force Sensitive Resistor 0.5 inch FSR
MPN :
SKU : FSR402-C88
Stock : Out of Stock
Price:PKR 1100.00
Function: Force Sensitive Resistor , or Pressure sensor
Catagory: Electronic Model
Product Model: FSR402
Size: View the picture below
 
 
FSR is one Force Sensitive Resistor, allowing you to detect the physical pressure, extrusion, and weight.They are simple using, low cost.
FSR is delimited by two layer, as the pressure increases, the activity of these elements point will touch the semiconductor, making resistance smaller
 
 
 
FSR can be seen as a resistor, through the size of the pressure to change its resistance, the resistance (in ohms per unit O) depends on how much repression.These sensors are fairly low cost and easy to use, but they rarely accurate.They sort is various, performance difference is only about 10%.So basically you use FSR, you should probably only expect to get a response range.Although the FSR can detect the weight, but choose their to get concrete data on the weight of is impossible.
 
 
 
However, for most of the touch sensitive applications, such as "how much" this will be squeezed or push, they are a good choice, because of the high cost performance!
 
 
 
Parameter
Size: thick (12.5 mm) in diameter, 1/2 "for the active field
Resistance range: infinite/open (not pressure), 100 k O (light), 200 O (maximum pressure)
Load range: 0 to 20 pounds (0 to 100 Newton), evenly smear on the surface area of 0.125 square meters
Power supply: the use of less than 1mA current (depending on the ra/pull down resistor and the power supply voltage)
 
 
As we've said, FSR makes resistance changing as more and more pressure, when there is no pressure sensor looks like an infinite resistance (open), with the increase of pressure, resistance decreased.The graph shows under different pressure measurement sensor resistance value.(please note that the force is not in grams, but Newton)
 
It is important to note: it is not a standard linear graph (number/log figure), especially in low load quickly from infinite to 100kO.
 
 The easiest way to test your FSR works, the first is using the multimeter, connected to sensors 2 pins and looking at how resistance change by hand to squeeze.The resistance change is very big, automatic range instrument can easily test it out.Before you "give up" test, make sure you tried different range 1 megohm and 100 ohms
 
  • Google Checkout
  • Master Card
  • Paypal
  • Acc
  • Acc2
  • Visa

Copyright © 2014, All rights reserved.