Shop Categories

Product Details

 STM32F103C8T6 ARM STM32 Minimum System Development Board For Arduino
STM32F103C8T6 ARM STM32 Minimum System Development Board For Arduino
MPN :
SKU : STM32F103-C325
Stock : 16pcs
Price:PKR 700.00
See this product in video click on the following link: https://youtu.be/TvHcxf7MGwk

For demo video click here: https://www.youtube.com/watch?v=K-jYSysmw9w

This is a STM32F103C8T6 Dev kit. With a 72mhz arm cortex-M3 cpu, it is perfect for projects what require more processing power.

MCU: STM32F103C8T6
CPU: ARM 32bit Cortex-M3
Frequency: 72MHz working
Flash: 64K
Memory: 20K SRAM
Working voltage: 2.0-3.6V DC
Comms: USB or UART
Size: 22mm x 53mm

STM32F103C8T6 ARM STM32 Minimum System Development Board Module
A much more powerful board than the standard Arduino uno. The STM32F103xx incorporates the high-performance  ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. It offers two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.


The devices operate from a 2.0 to 3.6 V power supply. They are available in both the –40 to +85 °C temperature range and the –40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications.


Quick Specs


ARM® 32-bit Cortex® -M3 CPU Core
72 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
Single-cycle multiplication and hardware division
Memories § 64 or 128 Kbytes of Flash memory
20 Kbytes of SRAM
Clock, reset and supply management
2.0 to 3.6 V application supply and I/Os
POR, PDR, and programmable voltage detector (PVD)
4-to-16 MHz crystal oscillator
Internal 8 MHz factory-trimmed RC
Internal 40 kHz RC
PLL for CPU clock
32 kHz oscillator for RTC with calibration
Low-power
Sleep, Stop and Standby modes
VBAT supply for RTC and backup registers
2 x 12-bit, 1 µs A/D converters (up to 16 channels)
Conversion range: 0 to 3.6 V
Dual-sample and hold capability
Temperature sensor
DMA
7-channel DMA controller
Peripherals supported: timers, ADC, SPIs, I2 Cs and USARTs
Up to 80 fast I/O ports
26/37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant § Debug mode
Serial wire debug (SWD) & JTAG interfaces
7 timers
Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
16-bit, motor control PWM timer with dead-time generation and emergency stop
2 watchdog timers (Independent and Window)
SysTick timer 24-bit downcounter
Up to 9 communication interfaces
Up to 2 x I2 C interfaces (SMBus/PMBus)
p to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
Up to 2 SPIs (18 Mbit/s)
CAN interface (2.0B Active)
USB 2.0 full-speed interface
CRC calculation unit, 96-bit unique ID
Packages are ECOPACK®
  • Google Checkout
  • Master Card
  • Paypal
  • Acc
  • Acc2
  • Visa

Copyright © 2014, All rights reserved.