Click on the following link for product video demo presentation. https://youtu.be/WNFVnOkuXVA

Hotrc KT-6A 2.4G 6CH RC Transmitter Receiver FHSS & 6CH With Box For Rc Airplane DIY KT Board Machine FPV Drone


Description:
Suitable Model Type: RC airplane/drone/car/boat
Channels: 6CH
RF Range: 2.4Ghz ISM(2.4005-2.483.5GHz)
RF Distance: Ground 400m, Aerial:800m
RF Power: <100mW
Modulation: GFSK
Spread spectrum: FHSS
Reaction speed: PWM =20ms
FR Distance: Ground:˜400m, Aerial:˜800m
Receive sensitivity : <-97dbm
Transmitter voltage : DC4.5V-9V
Receiver voltage: DC4V-6V
Weight: 370g


RF:
There are three situation for the remont control status indicator:
1. Constant light means the signal is good
2. Regular flashing indicating no signal
3. Irregular flashing indicating weak signal


FC:
There are two situations for the flight control indicator:
1. Constant light means calibration is complete
2. Blinking indicates that calibration is in progress


Code Step:
1. Turn off the transmitter,
2. Insert the code line correctly into the receiver "bing" interface,
3. Insert the ESC signal line correctly into the "CH3" channel, and the receiver LED will flash,
4. Firstly adjust the transmitter throttle stick to the lowest position, turn on the transmitter power switch , and receiver LED will go out,
5. Unplug the code line. At this time, the receiver LED will be on constantly, indicating that the code is successful.
Receiver LED Status:
Blinking: Indicates that the power is on, no signal, no match.
Steady on: The match is successful.


Package Included:
1 x KT-6A Transmitter (no battery)
1 x 1 receiver
1 x manual